Turn off the heater’s power at the breaker, or set a gas heater’s control to off. Close the cold-water valve on the pipe entering the top of the tank. Keep clear of hot water and never cap a relief valve that is discharging. Then contact a licensed plumber.
Smell gas? Don’t touch light switches or anything that can spark. Get everyone outside, then call 911 or your gas utility’s emergency line from outside. That is not a plumbing call.
How do I make a leaking water heater safe?
- Cut the energy. Electric: switch off the water heater breaker. Gas: turn the control knob on the heater to off.
- Close the cold-water inlet. It is the valve on the pipe going into the top of the tank. If it won’t close, use the main shut-off.
- Keep clear. The water can scald. Keep children and pets away.
- Protect the area. Move stored items and put down towels or a tray.
Relief valve discharging? The temperature and pressure relief valve, with a pipe running down the side of the tank, opens when the tank is too hot or over-pressured. Never plug or cap it. Turn off the power or gas and call a plumber.
Where is it leaking from?
- Top connections: water around the pipes on top. Often a fitting that can be repaired.
- Relief valve pipe: a pressure or temperature problem, or a worn valve.
- Drain valve at the bottom: a drip from the tap-like valve. Sometimes repairable.
- The tank itself: water from under the jacket or the base usually means the tank has corroded through. That is a replacement, not a repair.
Is it an emergency?
A steady leak from the tank, a discharging relief valve or water reaching floors and walls needs a plumber now. A slow drip from a fitting, with the water and energy turned off, can usually wait for normal hours and normal rates.
What will the plumber ask?
Gas or electric, tank size if you can read the label, roughly how old it is, and where the water appears. Having that ready makes the phone quote more accurate. See questions to ask before you hire.