The main shut-off valve is usually where the water line enters the house: in a basement, crawl space, garage or utility area, or outside near the meter. Turn a round wheel handle clockwise until it stops, or turn a lever handle a quarter turn so it sits across the pipe.
Where is the main water shut-off valve?
- Homes with a basement or crawl space: on the wall facing the street, where the pipe comes through.
- Homes on a slab: in the garage, near the water heater, or on an outside wall.
- Warm climates: often outside, on the wall or in a ground box near the property line.
- Apartments and condos: frequently in a utility closet, or a building valve managed by the property manager.
Your home inspection report usually lists the location. If you can’t find it, your water utility can tell you where the meter and its valve are.
How do I turn it off?
- Wheel handle (gate valve): turn clockwise, several full turns, until it stops. Don’t force it.
- Lever handle (ball valve): a quarter turn. The water is off when the lever sits across the pipe.
Then open a tap on the lowest floor. The flow should slow to nothing within a minute or so.
What if the valve is stuck or won’t close?
Old gate valves seize. Don’t use a wrench on the handle: it can snap the stem and make things worse. Use the valve at the meter instead, or call your water utility, which can shut the supply at the street.
Can I just shut off one fixture?
Yes, and it is the better choice when it works. Toilets and sinks have a small valve on the supply line beneath them. Washing machines have two behind the machine. Water heaters have one on the cold inlet at the top.
What should I do now, before anything goes wrong?
- Find the main valve and make sure nothing is stored in front of it.
- Tag it so anyone in the house can find it.
- Close and reopen it once a year so it doesn’t seize.