Don’t flush again. Close the shut-off valve on the pipe behind or beside the toilet by turning it clockwise. If it won’t turn, lift the tank lid and raise the float to stop the tank refilling. Once the water stops, use a flange plunger. Call a plumber if other drains are backing up too.
How do I stop a toilet overflowing?
- Don’t flush again. A second flush sends another tank of water into a blocked bowl.
- Close the supply valve. It is on the wall or floor behind the toilet. Turn it clockwise until it stops.
- If the valve is stuck, take the lid off the tank and lift the float, or push the flapper at the bottom closed.
- Still running? Close the main shut-off valve.
How do I clear the blockage?
- Use a flange plunger, the kind with a sleeve that fits the outlet. Seal it and push steadily about ten times.
- If plunging fails, a toilet auger reaches a little further without scratching the bowl.
- Skip chemical drain cleaners. They rarely clear a toilet and leave caustic water in the bowl.
When is it more than a clog?
Call a plumber if plunging doesn’t work, if the toilet overflows without being flushed, or if water rises in a tub or shower when you flush. That last sign points to the main drain, covered in the sewage backup guide.
What about the water on the floor?
Clean water from the tank or supply is a mopping job. Water that came up through the bowl should be treated as contaminated: wear gloves, disinfect hard surfaces, and dry the room quickly. If it reached the ceiling below, tell your insurer.